StarTech USB 3.1 Rugged External Hard Drive Enclosure

This USB 3.1 external hard drive enclosure keeps your data protected in harsh environments. With data transfer speeds of up to 10Gbps, the enclosure gives you quick access to your data when you’re out in the field. The 2.5" SATA hard drive enclosure supports both solid-state drives (SSD) and hard drives (HDD). It comes with a USB-C to USB-C cable and a USB-A to USB-C cable to support both USB-C and USB-A laptops and tablets.

Dustproof and Water Resistant
• Be prepared for the unexpected. The SSD and HDD enclosure comes with an IP65 rating, which means that it’s both dustproof and water resistant. It’s the perfect solution for people who work outside. Or, for people who work in environments with a lot of dust, like: construction sites, factories, or manufacturing facilities.

Military-Rated Protection
• The rugged hard drive enclosure is military rated (MIL-STD-810G) to protect your drive against drops, shock, and vibration. The exterior casing provides shock resistance, while the flexible silicone sleeve provides extra protection, absorbing the impact of bumps, rough baggage handling or drops. Inside, an extra layer of silicone provides drive stability.

Faster Transfer Speeds with USB 3.1
• The enclosure delivers USB 3.1 performance with data transfer speeds of up to 10Gbps. It lets you leverage the high performance of the latest drives and alleviates bottlenecks while transferring data.

Hardware:
• Bus Type: USB 3.1 Gen 2
• Chipset ID: ASMedia - ASM235CM
• Compatible Drive Types: SATA
• Drive Installation: Fixed
• Drive Size: 2.5in
• Fan(s): No
• Industry Standards: MIL-STD-810G, Method 503.5 (Thermal Shock), MIL-STD-810G, Method 514.6 (Vibration), MIL-STD-810G, Method 516.6 (Shock), MIL-STD-810G, Method 507.5 (Humidity), MIL-STD-810G, Method 509.5 (Salt Spray), MIL-STD-810G, Method 510.5, Procedure I (Sand and Dust), MIL-STD-810G, Method 508.6 (Fungus)
• Interface: USB 3.1 Gen 2
• Number of 2.5 inch bays: 1
• Number of Drives: 1
• Supported Drive Height(s): 7mm, 9.5mm

Performance:
• 4Kn Support: Yes
• Hot Swap Capability: No
• Max Drive Capacity: Tested up to 2TB at 7200 RPM
• Maximum Data Transfer Rate: 10 Gbps
• MTBF: 48,000 hours
• S.M.A.R.T. Support: Yes
• TRIM Support: Yes
• Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
• UASP Support: Yes

Connector(s):
• Drive Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
• Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps)
• Other Interface(s): 1 - USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps) Female

Indicators:
• LED Indicators: 1 - Diagnostic LED (Drive Power and Activity)

Power:
• Power Source: USB-Powered

Physical Characteristics:
• Color: Black
• Material: Plastic
• Max Drive Height: 9.5 mm
• Product Height: 3 cm
• Product Length: 14.6 cm
• Product Width: 11.2 cm
• Weight of Product: 304 g

• Note: Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
• OS Compatibility: OS independent; No software or drivers required

• 1x drive enclosure
• 1x USB-C to USB-C cable
• 1x USB-C to USB-A cable
• 1x foam drive pad
• 1x hex key
• 1x quick-install guide