Skip to main content
One of NZ’s biggest online shops for computer & office supplies
Show Category menu
Out Of Stock. Enquire for Availability

HP 2920-24G-POE+ 24 Port 10/100/1000 Manageable POE Switch

Save $92.00 off RRP
Hewlett Packard Enterprise

Genuine NZ new item

Find out more...

Last Available Price:

$2595.60incl gst

Free Delivery

Out Of Stock. Enquire for Availability

Delivery Timeframe

  • Auckland
    1 Day
  • North island
    1-2 Days
  • South island
    1-3 Days

Product Description:

HP 2920-24G-POE+ 24 Port 10/100/1000 Manageable POE Switch

The HP 2920 Switch Series consists of five switches: the HP 2920-24G and 2920-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP 2920-48G and 2920-48G-PoE+ and 2920-48G 740W PoE+ Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or SFP connectivity. In addition, the 2920 switch series supports up to four optional 10 Gigabit Ethernet (SFP+ and/or 10GBASE-T) ports, as well as a two-port stacking module. These options provide you with flexible and easy-to-deploy uplinks and stacking. Together with static and RIP routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the HP 2920 Switch Series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at the enterprise edge, in remote branch offices, and in converged networks.


Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
Large buffers: provide graceful congestion management
Flexible 10 Gbps Ethernet connectivity: up to four optional 10-Gigabit ports (SFP+ and/or 10GBASE-T)
Two-port stacking module with up to 40 Gbps/port: optional two-port stacking module allows stacking of up to four switch units into a single virtual device
Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of IPv6 networks. Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
Energy-efficient design: High-efficiency power supplies: 80 PLUS Silver Certified power supply increases power savings. Energy-efficient Ethernet (EEE) support: reduces power consumption in accordance with IEEE 802.3az.
HP ProVision ASIC architecture: is designed with the latest HP ProVision ASIC, providing very low latency, increased packet buffering, and adaptive power consumption
Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths


20 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Duplex: 10BASE-T/100BASE-TX: half or full
1000BASE-T: full only
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
2 module slots
1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
Memory and processor: Tri Core ARM1176 @ 625MHz, 512MB SDRAM, packet buffer size: 11.25MB (6.5 MB dynamic egress + 4.5 MB ingress), 1GB flash
Latency: < 3.3 s (FIFO 64-byte packets)
Throughput: 95.2 million pps
Switching capacity: 128Gbps
Power consumption: 475 W (maximum), 42 W (standby)
Operating temperature range: 0 to 55C
Operating humidity range: 15 to 95% (noncondensing)
Power supply name: 1 x J9738A
Heat dissipation: 358 BTU/hr (377.69 kJ/hr)
Dimensions (W x D x H): 44.25 x 33.6 x 4.4cm
Weight: 5.46 kg

Management Features:

IMC - Intelligent Management Center
Command-line interface
Web browser
Configuration menu
Out-of-band management (RJ-45 Ethernet)
SNMP Manager
In-line and out-of-band
Out-of-band management (serial RS-232C or Micro USB)

Hewlett Packard Enterprise

We are a HPE Silver NZ Partner

Featured Video:

Questions & Answers

Have a technical question about this product?

Ask us a question

Customer Product Reviews

Purchased this item? Be the first to write a review

Write your own review

Additional Details: