Planet FSD-604HP 4 Port Fast Ethernet 10/100TX PoE Unmanaged Switch + 2x SFP

PLANET FSD-604HP Desktop Switch provides four 802.3at PoE+ ports for catering to small-scale IP surveillance networks at a lower total cost. With dual 10/100BASE-TX uplink ports, the recorded HD video files from the 4 PoE IP cameras powered by the FSD-604HP are saved in the 4-channel NVR system. Its surveillance software performs comprehensive security monitoring and manages the surveillance system in the local LAN or remote site via Internet.

Two 10/100Mbps Uplink Ports
• The FSD-604HP comes with two uplink ports with 100Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outdoor network where the four PoE+ ports can be used to their full potential.

Innovative Port-based VLAN Protection
• The FSD-604HP features "Port-based VLAN Protection" where ports can be isolated from each other via one DIP switch. This can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.

Distance Extended for Transmission of Power and Data
• The built-in solid DIP switch provides "Standard" and "Extend" operation modes. The FSD-604HP operates as a normal IEEE 802.3at/af PoE Switch in the "Standard" operation mode. In the "Extend" operation mode, the FSD-604HP operates on a per-port basis in 10Mbps duplex mode but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-604HP provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation.

Robust Protection
• The FSD-604HP provides contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

Environment-friendly, Fanless Design for Silent Operation
• The FSD-604HP comes with a desktop-sized, compact metal housing, making the placement of the unit convenient. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Moreover, the FSD-604HP is able to operate reliably and stably in any environment without affecting its performance. The deployment of PoE PDs with constant power feeding can be easily and quickly done.

Hardware:
• Network Connector: 6-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
• PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port-1 to Port-4)
• LED Display: System: Power (Orange). Per PoE port: PoE (Orange, Port 1 to Port 4), LNK/ACT (Green, Port 1 to Port 6)
• DIP Switch: 100m distance in standard mode, 250m distance in extend mode (based on the cable category)
• Switch Architecture: Store and Forward switch architecture
• MAC Address Table: 2K MAC address table with auto learning function
• Switch Fabric: 1.2Gbps
• Switch Throughput: 0.89Mpps @64bytes
• Maximum Packet Size: 1536bytes
• Flow Control: Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
• Power Requirements: AC 100~240V, 2A max.
• Power Consumption: Max. 63 watts, 214 BTU
• ESD Protection: Contact discharge of ±4KV DC, Air discharge of ±6KV DC
• Surge Immunity: ±4KV
• Dimensions (W x D x H): 168 x 93 x 32 mm
• Weight: 499g

Power over Ethernet:
• PoE Standard: IEEE 802.3af Power over Ethernet/PSE, IEEE 802.3at Power over Ethernet Plus/PSE
• PoE Power Supply Type: End-span
• Power Pin Assignment: 1/2(+), 3/6(-)
• PoE Power Output: Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af), Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
• PoE Power Budget: 60 watts
• Number of PDs, 7 watts: 4
• Number of PDs, 15.4 watts: 4
• Number of PDs, 30 watts: 2

Standard Conformance:
• EMI Safety: CE, FCC
• Standard Compliance: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus

Environment:
• Operating Environment: 0 ~ 50 degrees C
• Storage Environment: -10 ~ 70 degrees C
• Operating Humidity: 5 ~ 95%, relative humidity, non-condensing
• Storage Humidity: 5 ~ 95%, relative humidity, non-condensing