TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+

Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port of this switch. The total 63 W PoE power budget for the 8× PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.

• 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port
• With 8 PoE+ ports, transfers data and power on one single cable
• Works with IEEE 802.3af/at compliant PDs and expands office network
• 802.1p/DSCP QoS enable smooth latency-sensitive traffic
• High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports
• Up to 250 m data and power transmission range under Extend Mode
• Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive applications
• Isolation Mode allows one-click client traffic separation for higher security and performance
• Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery
• Easy to use, with no configuration and installation needed

Hardware:

• Interface: 8 PoE+ 10/100/1000Mbps RJ45 Ports, 1 10/100/1000Mbps RJ45 Port, 1 Gigabit SFP Slot
• Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100Ω STP (maximum 100m), 100BASE-TX: UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100Ω STP (maximum 100m), 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m), EIA/TIA-568 100Ω STP (maximum 100m), 1000BASE-X MMF, SMF
• Fan Quantity: Fanless
• Physical Security Lock: Yes
• Power Supply: External Power Adapter (Output: 53.5VDC / 1.31A)
• Packet Forwarding Rate 14.88 Mpps
• PoE+ Ports (RJ45): Standard: 802.3at/802.3af compliant, PoE Ports: Port1- Port 8, PoE Power Budget: 63W
• Mac Address Table: 4K
• Jumbo Frame: 16 KB
• Switching Capacity: 20 Gbps
• Dimensions (W x D x H): 209 x 126 x 26 mm
• Max Power Consumption: 7.11 W (220/50Hz. no PD connected), 78.13 W (220/50Hz. with 63W PD connected)
• Max Heat Dissipation: 24.25 BTU/h (no PD connected), 266.42 BTU/h (with 63W PD connected)

Software:

• Advanced Features: Compatible With IEEE 802.3af/at Compliant PDs, EEE802.3x Flow Control, 802.1p/DSCP QoS, IGMP Snooping
• Transmission Method: Store-And-Forward

Environment:

• Operating Temperature: 0°C ~ 40°C
• Storage Temperature: -40°C ~ 70°C
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing

• TL-SG1210P
• Power Adapter
• Installation Guide