APC 2G Switched Zero U 32A 230V (21) C13 & (3) C19 Rack PDU

APC 2G Switched Zero U 32A 230V (21) C13 & (3) C19 Rack PDU

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.

Specifications

• Maximum Total Current Draw per Phase 32A
• Output Connections (21) IEC 320 C13, (3) IEC 320 C19
• Overload Protection Yes
• Nominal Input Voltage 200V,208V,230V
• Input Frequency 50/60 Hz
• Input Connections IEC 309 32A 2P+E
• Cord Length 10 feet (3.05 meters)
• Number of Power Cords 1
• Acceptable Input Voltage 220-240 VAC
• Maximum Line Current per phase 32A
• Maximum Input Current per phase 32A
• Dimensions Height 1829mm,Width 56mm, Depth 46mm
• Net Weight 16.70 lbs. (7.59 kg)
• Color Black
• Operating Environment 23 - 113 °F (-5 - 45 °C)
• Operating Relative Humidity 5 - 95%
• Operating Elevation 0-10000 feet (0-3000 meters)
• Storage Temperature -13 - 149 °F (-25 - 65 °C)
• Storage Relative Humidity 5 - 95%
• Storage Elevation 0-50000 feet (0-15000 meters)
• Regulatory Approvals EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,VDE
• Environmental Compliance RoHS,REACH: Contains No SVHCs,Contains Lithium Battery