StarTech USB 3.1 2.5 Inch SATA Drive Enclosure

This USB 3.1 Gen 2 single-drive enclosure gives you an ultra-fast, portable external storage solution for 2.5 Inch hard drives or solid-state drives up to 15 mm in height. The enclosure provides quick access to your data wherever you go and it lets you retain your data after an upgrade to a new SSD or HDD in your computer.

Ultra-fast performance
• The drive enclosure lets you leverage the high performance of the latest SSDs and HDDs. USB 3.1 Gen 2 also gives you greater bandwidth and speeds up to 10Gbps for ultra-fast access to your data.

Versatile and compatible
• Compatible with virtually all 2.5" SATA drives up to 15 mm in height. Plus, it comes with a USB Type-C to Micro-B cable, for connecting to newer USB-C enabled laptops, tablets, and phones.

Protection for your data
• The enclosure is engineered with a sleek and durable aluminum housing to help keep your data safe and secure wherever you go.

Hardware:
• Bus Type: PCI Express
• Chipset ID: PLX/Oxford - OXuPCI952
• Compatible Drive Types: SATA
• Drive Size: 2.5 Inch
• Fan(s): No
• Interface: USB 3.1 Gen 2
• Number of Drives: 1

Performance:
• 4Kn Support: Yes
• Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
• Maximum Data Transfer Rate: 10 Gbps
• TRIM Support: Yes
• Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
• UASP Support: Yes

Connector(s):
• Drive Connectors: 1x SATA Data & Power Combo (7+15 pin) Female
• Host Connectors: 1x USB 3.1 USB Type Micro-B (10 pin, Gen 2, 10 Gbps) Female

Indicators:
• 1x Power & Activity

Power:
• Power Source: USB-Powered

Environmental:
• Humidity: Operation Humidity: 10% ~ 90% RH ; Storage Humidity: 5% ~ 95% RH
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Storage Temperature: -10°C to 65°C (14°F to 149°F)

Physical Characteristics:
• Color: Black
• Enclosure Type: Aluminum
• Max Drive Height: 15 mm
• Product Height: 21.5 mm
• Product Length: 120 mm
• Product Weight: 105 g
• Product Width: 75 mm

OS Compatibility:
• OS independent; No software or drivers required

• 1x drive enclosure
• 1x USB-C to Micro-B cable
• 1x USB-A to Micro-B cable
• 1x screwdriver
• 5x drive-mount screws
• 3x enclosure screws
• 1x quick-start guide