StarTech USB 3.1 USB-C to 3x USB Type-A Hub with SD Card Reader - Space Grey

Expand the connectivity of your USB-C laptop with this bus-powered 3-Port USB-C hub. It plugs into your laptop’s USB Type-C or Thunderbolt 3 port, adding three USB-A ports and an SD card reader, so you can quickly connect more peripherals and devices.

SD & microSD Card Reader

• The hub provides direct access to your SD memory cards or microSD cards as an additional medium for data storage and data transfer. Adapter required for microSD cards.

Convenient Portability and Easy Setup

• This compact, lightweight USB-Type-C hub is a convenient and portable addition to your laptop accessories.? The USB-C cable is built-in, and hub is bus-powered, so it draws its power directly from your computer’s USB-C port, with no external power required. That means fewer cables to carry with you when you travel. The hub can draw up to 15 Watts of power from the connected host and operating multiple bus powered devices at one time with the total available power dependent on the connected host. The extended length attached cable?of?9.8” (25 cm) provides more flexibility for longer reach connection requirements and plug and play installation.?

Connect Three USB-A Peripherals

• With support for USB-A peripherals, this hub is backwards compatible supporting both legacy and new USB devices. You can connect flash drives, video capture devices and external hard drives, with fast data transfer speeds of up to 10Gbps. This USB Type-C hub enhances your productivity, giving you the connections, you need while you work.

Hardware:

• Bus Type: USB 3.1 Gen 2
• Chipset ID: Realtek - RTS5420, Realtek - RTS5329
• Fast-Charge Port(s): No
• Industry Standards: USB 3.1 Gen 2
• Backward compatible with USB: 3.0, 2.0 and 1.1
• Interface: USB 3.1 Gen 2
• Ports: 3
• USB Pass-Through: Yes
• USB-C Device Port(s): No
• USB-C Host Connection: Yes

Performance:

• Maximum Data Transfer Rate: 10 Gbps
• Memory Media Type: SD/MMC (Secure Digital/Multimedia Card), SDHC (Secure Digital High Capacity), SDXC (Secure Digital eXtended Capacity), microSD (Micro Secure Digital) (adapter required), microSDHC (Micro Secure Digital High Capacity) (adapter required), microSDXC (Micro Secure Digital eXtended Capacity) (adapter required)
• SD Card Reader Supports SD 4.0 and UHS-II (Ultra High Speed) for high speed file transfers, with bus speed up to 312 Mbps
• Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s
• UASP Support: Yes

Connector(s):

• Connector Type(s): 1 - USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps) Plug, 3 - USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps) Receptacle, 1 - SD Slot Receptacle

Indicators:

• LED Indicators: 1 - Link and Activity LED

Power:

• Power Source: Bus Powered

Environmental:

• Humidity: 0% to 95% (non-condensing) at 25?
• Operating Temperature: 0 to 50?
• Storage Temperature: -20 to 70?

Physical Characteristics:

• Cable Length: 250 mm
• Color: Black & Space Gray
• Form Factor: Compact
• Material: Aluminum and Plastic
• Product Height: 3.8 cm
• Product Length: 207 mm
• Product Width: 144 mm
• Weight of Product: 196 g

• USB-C Hub