StarTech Gigabit Ethernet over Coaxial Unmanaged Network Extender Kit + Headphones Draw Offer

The EOC1110K Gigabit Ethernet over Coaxial Unmanaged LAN Extender Kit (2.4km) includes both end points, and allows you to span a 10/100/1000Mbps Ethernet network over extremely long distances (up to 2.4 km/1.5 mi) while still maintaining high-speed network connectivity.

• Plug-and-play design for simple installation; no configuration or software required
• Uses existing coaxial cable, RG-59, RG-6, RG-7, or RG-11
• Transmit up to 2.4 km (1.5 mi)

Hardware:
• Industry Standards: HCNA (ITU G.9954 – HPNA 3.1), IEEE 802.3 10BASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-TX

Performance:
• Max Transfer Distance: 2.4 km
• Maximum Data Transfer Rate: Up to 112Mbps @ 2,952 ft (900 m), Up to 64Mbps @ 1.5 mi (2.4 km). Speed/distance will vary depending on type/quality of line used (see manual for detailed chart)
• MTBF: 57,000 Hours
• Transmission Power: 0 dBm, 12~44MHz

Connector(s):
• Local Unit Connectors: 1 - RJ-45 Female, 2 - Type F (RF Coax) Female
• Remote Unit Connectors: 1 - RJ-45 Female, 2 - Type F (RF Coax) Female

Indicators:
• LED Indicators: 1 - Coax Link/Activity, 1 - Coax Sync, 1 - LAN Link/Activitym, 1 - Power

Power:
• Center Tip Polarity: Positive
• Input Current: 0.36A
• Input Voltage: 100 - 240 AC
• Output Current: 1.6 A
• Output Voltage: 12V DC
• Plug Type: M
• Power Consumption (In Watts): 4
• Power Source: 2 AC Adapters Included

Physical Characteristics:
• Color: Black
• Product Height: 2.9 cm
• Product Length: 77 mm
• Product Width: 13.8 cm
• Weight of Product: 667 g

• System and Cable Requirements: 75? (ohm) coaxial RG-59, RG-6, RG-7, or RG-11 cable is required

• 1x Local Unit
• 1x Remote Unit
• 2x Universal Power Adapters (NA/EU/UK) or AU in Austrlia
• 1x User Manual