StarTech 1 Port PCI Gigabit Ethernet Network Adapter Card

This PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network, and is fully compatible with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards. Suitable for any PCI-enabled client, server or workstation, the Gigabit Ethernet Network Adapter Card supports high performance dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.

• A single 10/100/1000Mbps compatible RJ45 Ethernet port
• Network Link/Activity and 10/100/1000 Mbps LED indicators
• Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging

Hardware:
• Bus Type: PCI / PCI-X (5 / 3.3V)
• Card Type: Standard Profile (LP bracket incl.)
• Chipset ID: Realtek - RTL8110SC
• Industry Standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.11u, PCI 2.1, 2.2
• Interface: RJ45 (Gigabit Ethernet)
• Ports: 1

Performance:
• Compatible Networks: 10/100/1000 Mbps
• Full Duplex Support: Yes
• Maximum Data Transfer Rate: 1000 Mbps
• MTBF: 36,000 Hours
• Supported Protocols : CSMA/CD

Connector(s):
• Connector Type(s): 1x PCI / PCI-X (Universal 3.3 & 5V, 32-bit) Male
• External Ports: 1x RJ-45 Female

Indicators:
• 1x 10/100/1000 Mbits/sec Link/Activity

Environmental:
• Humidity: 10% ~ 95% RH
• Operating Temperature: 0°C to 55°C (32°F to 131°F)

Physical Characteristics:
• Product Height: 63 mm
• Product Length: 123 mm
• Product Weight: 53 g
• Product Width: 20 mm

OS Compatibility:
• Windows NT, ME, 2000, XP, Vista, 7, 8, 8.1, 10
• Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016
• Netware Server 5.x, Netware ODI for DOS
• Linux 2.6.x to 4.11.x, Unix
• Mac OS X 10.4

Note:
• IRQ Line & I/O Address allocated by system

• 1x Gigabit Ethernet PCI Card
• 1x Low Profile bracket
• 1x Driver CD
• 1x Instruction Manual