StarTech VGA to Cat 5 Monitor Extender Kit

The ST121UTPEP VGA Video Extender over Cat5 - Point to Point lets you connect a remote VGA display/projector up to 80m away from the VGA signal source. The ST121UTPEP is a bundled kit that includes both a local and a remote unit providing a complete end to end solution for a single source/display connection, transmitting the source VGA signal over a standard Ethernet cable (Cat5 or better UTP cable, terminated with RJ45 connectors). Offering convenient and cost-effective VGA distribution, the ST121UTPEP only requires one power adapter which can be installed at either the local or remote end of the connection, depending on what is most convenient for your application.

• Extends video signal by up to 250 ft. (80m)
• Supports 1920x1200 or 1600x1200 resolutions at 50m
• Supports 1280x1024 or 1024x768 resolutions at 80m

Hardware:

• Audio: No
• Cabling: Cat 5 UTP
• Daisy-Chain: No
• Ports: 1

Performance:

• Max Distance: 80 m
• Supported Resolutions: 1920x1200 @ 50m), 1280x1024 @ 80m

Connector(s):

• Local Unit Connectors: 1x RJ-45 Female, 1x VGA (15 pin, High Density D-Sub) Female
• Remote Unit Connectors: 1x RJ-45 Female, 1x VGA (15 pin, High Density D-Sub) Female

Power:

• Center Tip Polarity: Positive
• Output Current: 0.6 A
• Output Voltage: 12 DC
• Plug Type: M
• Power Consumption (In Watts): 7.2
• Power Source: AC Adapter Included

Physical Characteristics:

• Color: Black
• Enclosure Type: Aluminum
• Product Height: 25 mm
• Product Length: 100 mm
• Product Weight: 263 g
• Product Width: 138 mm

Note:

• Resolution may vary at distances depending on cable quality. Cat 5e UTP cables are recommended.

• 1x VGA over Cat5 Transmitter
• 1x VGA over Cat5 Receiver
• 1x Installation Bracket (w/ screws)
• 1x VGA Cable
• 1x Universal Power Adapter (NA/UK/EU/AUS)
• 1x Instruction Manual