StarTech 4-Port Dual Monitor DVI VGA KVM Switch with Audio & USB 2.0 Hub

The SV431DDVDUA 4-port DVI VGA dual monitor KVM switch lets you control 4 Dual Display computers using a single USB mouse and keyboard peripheral set. This dual view KVM switch provides 1 VGA and 1 DVI-I port per computer connection for high-resolution video, as well as audio switching capability between connected computers.

• Direct channel selection and operation using front panel push-button or keyboard hotkeys
• Supports a maximum digital resolution of 1920 x 1200 and analog of 1920 x 1440; Recommended resolution is 1920 x 1200
• OS independent (no drivers or software required)

Hardware:

• Audio: Yes
• Cables Included: No
• Daisy-Chain: No
• KVM Ports: 4
• Number of Monitors Supported: 2
• PC Interface: USB
• PC Video Type: DVI+VGA
• Rack-Mountable: Optional

Performance:

• DVI Support: Yes - Single Link
• Hot-Key Selection: Yes
• IP Control: No
• Maximum Analog Resolutions: 1920 x 1400
• Maximum Digital Resolutions: 1920 x 1200
• Maximum Number of Users: 1
• MTBF: 140000 hours
• On-Screen Display: No
• Port Selection Support: Push Button and Hotkeys

Connectors(s):

• Console Interface(s): 1 - DVI-I (29 pin) Female, 1 - VGA (15 pin, High Density D-Sub) Female, 2 - 3.5 mm Mini-Jack (3 Position) Female, 4 - USB Type-A (4 pin) USB 2.0 Female
• Host Connectors: 4 - 3.5 mm Mini-Jack (3 Position) Female, 4 - DVI-I (29 pin) Female, 4 - USB B (4 pin) Female, 4 - VGA (15 pin, High Density D-Sub) Female

Indicators:

• LED Indicators: 1 - Green - Power, 2 - Green - PC Detected, 2 - Red - PC Indicator

Power:

• Center Tip Polarity: Positive
• Input Current: 0.8A
• Input Voltage: 100 - 240 AC
• Output Current: 1.5A
• Output Voltage: 12V DC
• Plug Type: M
• Power Consumption (In Watts): 18
• Power Source: AC Adapter Included

Environmental:

• Humidity: 80% RH
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Storage Temperature: -20°C to 60°C (-4°F to 140°F)

Physical Characteristics:

• Color: Black
• Material: Steel

• OS Compatibility: OS independent; No software or drivers required
• Note: While both DVI-I (analog mode) and DVI-D (digital only) are supported by the KVM, both source PCs must output the same signal type for proper switching. It is recommended wherever possible to use DVI-D cables across all PC to KVM and KVM to Console connections. Please contact technical support for assistance identifying your source.

• 1x 4-port KVM Switch
• 1x Universal Power Adapter (NA/JP, EU, UK, ANZ)
• 4x- Foot Pads
• 1x Instruction Manual