StarTech HDMI over CAT 5e Full HD 1080p HDBaseT Extender Kit with IR - 1x Transmitter, 1x Receiver

The ST121SHD30 HDMI over CAT5e/CAT6 Video Extender kit lets you extend HDMI audio/video and an IR remote control signal by up to 100 feet (30 Meters) over dual CAT5 cable. For added versatility this HDMI extender kit is powered via the HDMI bus, and does not require any additional power adapter. With support for High-Definition resolutions of up to 1920x1080 / 1080p and the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. Plus, because the extender kit does not require a power adapter, you can easily extend an HDMI signal in areas where access to power outlets is limited. The HDMI over Cat5e/Cat6 video extender kit includes both the local transmitter and remote receiver units, perfect for point-to-point digital signage applications that require high quality HDMI video. The Extender also works to extend Infrared IR signals from remote controls, perfect for controlling your video source from your video destination.

• Supports Cat5e and Cat6 Ethernet cabling
• Power over HDMI
• No software/drivers required
• Supports HD resolutions up to 1080p (1920x1080)
• Includes transmitter (local) and receiver (remote) units

Hardware

• Cabling: Cat 5 UTP or better
• Daisy-Chain: No
• Ports: 1

Performance

• General Specifications: IR dongle frequency - 35 to 56 khz
• Max Distance: 30 m / 100 ft
• Maximum Digital Resolutions: 1080p / 1920x1080
• Wide Screen Supported: Yes

Connector(s)

• Local Unit Connectors: 1 - HDMI (19 pin) Female, 2 - RJ-45 Female
• Remote Unit Connectors: 1 - HDMI (19 pin) Female, 2 - RJ-45 Female

Environmental

• Humidity: 0% - 80 %
• Operating Temperature: 0 C to 40 C
• Storage Temperature: -10 C to 60 C

Physical Specifications

• Color: Black
• Enclosure Type: Aluminum
• Dimensions (HxLxW): 22 x 82 x 45 mm
• Weight: 235 g

Special Notes / Requirements

• Note: The extender does not work through Ethernet equipment, such as switches or routers
  This extender requires two CAT5 cables for the entire distance of your cable run.

• 1x HDMI over CAT5e/6 UTP Transmitter
• 1x HDMI over CAT5e/6 UTP Receiver
• 4x Foot Pad Set
• 1x IR Extender Kit
• 1x Mounting brackets
• 1x User Manual