StarTech 10/100 Fiber to Ethernet Media Converter Multi Mode SC 2 km

The MCM110ST2 10/100 Multi Mode ST Fiber Ethernet Media Converter (2 km) creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The ST media converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability.

• Supports a maximum multi mode fiber optic cable distance of 2 km
• Compatible with most 3COM, Cisco, Lucent and Nortel networks
• Compact design
• Supports transparent Q-in-Q double tagged frames
• Supports Link Fault Pass through (LFP)
• Supports IEEE 802.1q Tag VLAN pass thru
• Supports flow control (Pause)
• Provides switch configuration of half/full duplex transfer mode for FX port
• LED Indicators for simple Ethernet/Fiber network link monitoring
• Forward 9K jumbo packets in converter mode
• Auto negotiation or Force 10/100 Mbps and MDI/MDI-X (Crossover for TX port)
• Auto detects half/full duplex transfer mode from the TX port
• Manual controls for UTP mode, speed, Full and Half Duplex, and LFP (Link Fault pass-through) on/off
• Simple installation

Connector(s):

• Local Unit Connectors: 1 - RJ-45
• Remote Unit Connectors: 1 - Fiber Optic SC Duplex

Environmental:

• Operating Temperature: 0°C to 50°C (32°F to 122°F)
• Storage Temperature: -10°C to 70°C (14°F to 158°F)
• Humidity: 10~90% RH

Hardware:

• PoE: No
• WDM: No
• Industry Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-FX, IEEE 802.3u 100BASE-TX

Indicators:

• LED Indicators: 1 - Speed (Off - 10Mbps, On - 100 Mbps), 1 - Power, 1 - Full (Full duplex / Half duplex), 1 - Fiber Link & Activity (On - Fiber Link OK, Blinking - Activity on Fiber Link), 1 - FEF [Far End Fault](On - Fault Detected, Off - No Fault, 1 - Ethernet Link & Activity (ON - Ethernet Link OK, Blinking - Activity on Ethernet Link)

Performance:

• Maximum Data Transfer Rate: 10/100Mbps
• Max Transfer Distance: 2 km (1.2 mi)
• Type: Multi Mode
• Wavelength: 1310nm
• Fiber Operating Mode: Half/Full-Duplex
• MTBF: 65,000 Hours

Physical Characteristics:

• Weight of Product: 3.0 oz [84 g]
• Color: Black
• Material: Plastic
• Product Length: 3.7 in [95 mm]
• Product Width: 3.0 in [75 mm]
• Product Height: 0.8 in [2 cm]

Power:

• Power Source: AC Adapter Included
• Input Voltage: 100 - 240 AC
• Output Voltage: 12V DC
• Output Current: 1A
• Center Tip Polarity: Positive
• Plug Type: M
• Power Consumption (In Watts): 2.4W

• 1 - Media Converter
• 1 - Power Adapter
• 1 - Instruction Manual