Lenkeng HDbitT HDMI Video Matrix Transmitter Unit Over IP CAT5/5e/6

This HDbitT HDMI video matrix over IP includes a transmitter unit(TX) Only. It allows for the distribution and switching of high-definition video/audio signal by this product and off-the-shelf IGMP switch. It applied advanced HDbitT technology, the resolution supported is up to 4Kx2K@30Hz ultra-HD. It can also be used in a point-to-point connection; the distance is up to 120 metres. It is widely applied in digital signage advertisements, control rooms, command centres, entertainment and exhibition centre, safety monitoring system, etc.

• Apply advanced over IP Technology
• Resolution Supported is up to 4K x 2K 30Hz Ultra HD
• Transmission distance is up to 120 metres via CAT6
• Support IR Passback function to control source device from RX Location.
• Plug and Play.
• Support Scalable and flexible input-output matrix configuration allows 100 inputs to infinite output.
• support computer control software to select and switch source device input.
• Support to select and switch source device input from the receiver via remote control and hard button.
• Surge protection, Lighting Protection, ESD Protection.

• DMI compliance: HDMI1.4
• HDCP compliance: HDCP1.4
• Transport protocol: HDbitT
• Network bandwidth: 28Mbps
• Video support: 480i@60Hz、480p@60Hz、576i@50Hz、576p@50Hz, 720p@50/60Hz、1080i@50/60Hz、1080p@50/60Hz、4K×2K@24/25/30HZ
• Audio support: PCM
• InputTMDS signal: 0.7~1.2Vp-p
• InputDDC signal: 5Vp-p
• IR passback: yes
• IR frequance Range (KHz): 20-60KHz
• Network switch required: with IGMP function
• Input port: Transmitter: 1×HDMI | Receiver: 1×RJ45, 1×3.5mm(IR)
• Output port: Transmitter: 1×RJ45, 1×3.5mm(IR) | Receiver: 1×HDMI
• HDMI source control: Support IR pass back function to control source device from RX location ; Support to select and switch source device input from receiver via remote control and hard button ; Support computer control software to select and switch source device input.
• Max. input support: up to 99 transmitters
• LED Segment Displays: Transmitter: CHANNEL number | Receiver: CHANNEL number， RX ID
• HDMI connector: Type A 19 Pins, Female
• RJ-45 connector: RJ-45
• Housing: Metal enclosure
• Dimensions (L×W×H mm): 164×107.6×23.6mm
• Fixedness: wall-mounting kits with screws
• Power supply: 5V2A
• Power consumption: Transmitter: 6W | Receiver: 5W
• Operation temperature: 0~60℃
• Storage temperature: —20～70℃
• Relative humidity: 0～95%(no condensation)