Kingston Fury Renegade Pro 16GB 6400MHz DDR5 CL32 SDRAM Memory Module

Kingston FURY KF560R32RBE-16 is a 2G x 80-bit (16GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports AMD EXPO v1.1 and Intel Extreme Memory Profiles (Intel XMP) 3.0. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.

• No matter how heavy and numerous the applications that you are using, 6400 MHz memory speed with Registered signal will run them smoothly
• 16 GB of memory can produce approx. 10K MIPS and as a result, your system gets more room to run complex apps.
• With DDR5 SDRAM get efficient data transfer rate and enhanced computer's performance

• Memory Size: 16 GB
• Memory Speed: 6400 MHz
• Memory Technology: DDR5 SDRAM
• Memory Voltage: 1.40 V
• Memory Rank: Single-rank
• Number of Pins: 288-pin
• Thickness: 3.9 mm
• Form Factor: DIMM
• Length: 133.4 mm
• Width: 31.3 mm
• CL(IDD) 40 cycles
• Row Cycle Time (tRCmin) 48ns(min.)
• Refresh to Active/Refresh Command Time (tRFCmin) 295ns(min.)
• Row Active Time (tRASmin) 32ns(min.)
• Row Precharge Time (tRPmin) 16ns(min.)
• UL Rating 94 V - 0
• Operating Temperature 0o C to +95oC
• Storage Temperature -55oC to +100oC
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x80 ECC (x40, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free