Kingston Fury Renegade Pro 16GB 6000MHz DDR5 CL32 SDRAM Memory Module

Kingston FURY KF560R32RBE-16 is a 2G x 80-bit (16GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports AMD EXPO v1.1 and Intel Extreme Memory Profiles (Intel XMP) 3.0. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.

• Up to 6000 MHz speed with Registered signal and CL32 latency for smooth computer performance
• DIMM 16 GB of memory to maintain symmetry with processor and hard drive and bring out the ultimate computing experience
• The DDR5 SDRAM efficiently move data across electric components and provide smooth PC performance

• Memory Size: 16 GB
• Memory Speed: 6000 MHz
• Memory Technology: DDR5 SDRAM
• Memory Voltage: 1.35 V
• Memory Rank: Single-rank
• Number of Pins: 288-pin
• Thickness: 3.9 mm
• Form Factor: DIMM
• Width: 31.3 mm
• CAS Latency: CL32
• Error Checking: ECC
• Number of Modules: 1 x 16GB
• CL (IDD): 40 cycles
• Row Cycle Time (tRCmin): 48ns(min.)
• Refresh to Active/Refresh Command Time (tRFCmin): 295ns(min.)
• Row Active Time (tRASmin): 32ns(min.)
• Row Precharge Time (tRPmin): 16ns(min.)
• UL Rating: 94 V - 0
• Operating Temperature: 0°C to + 95°C
• Storage Temperature: -55°C to +100°C
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x80 ECC (x40, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free