HyperX ProCast Condenser XLR Microphone

The HyperX ProCast is a professional-grade condenser microphone with an XLR connection built for people who make a living with their voices. Capture more details in your recordings thanks to the cardioid gold-sputtered large diaphragm condenser capsule. The ProCast’s included anti-vibration shock mount and snap on HyperX Shield pop filter work together to help reduce unwanted rumbles and pops in your recordings. It also features a switchable 80Hz high-pass filter and -10dB PAD, further ensuring that you’re only recording exactly what you want in a variety of scenarios. With support for 3/8 inch and 5/8 inch threads, the stylish ProCast is compatible with most arms and stands, making it an easy way to take your streaming or recording setup to the next level.

Large condenser for excellent noise performance:
ProCast’s design enables better high-frequency details compared to electret and dynamic mics and improved low-frequency performance over smaller diaphragm condensers.

Cardioid polar pattern for solo recording:
The cardioid polar pattern emphasizes sounds in front of the mic, making it perfect for voiceovers, streaming, vocals, podcasts, or other single-source audio recordings.

Professional-grade XLR Connection:
The ProCast requires 48V of phantom power, so connect it via XLR cable to professional interfaces or preamps to start your recording.

Detachable HyperX Shield metal pop filter included:
Simply snap the HyperX Shield to the ProCast’s included anti-shock mount to filter out those plosive puffs of air that result from p sounds.

Fine-tune your audio recordings:
ProCast’s switchable 80Hz filter helps reduce unwanted low-end frequencies like rumbles and vibrations. The passive attenuation allows the mic to handle high sound pressure level sources of audio.

• Boom mic element: Gold-sputtered externally-polarized condenser
• Color: Black
• Compatibility: XLR
• Connection type: Balanced 3-pin XLR male
• Diameter of diaphragm: 1 inch
• Height: 209mm
• High-pass filter:-3dB@80Hz, -12dB/Octave
• Output Impedance: 16 Ω
• Length: 134mm
• Maximum input sound level: 140dBSPL (THD 1%@1kHz)
• Microphone dynamic range: 123dB
• Noise (RMS) (microphone): -118dBV (A-weighting) B65
• Passive attenuation device (PAD): -10dB
• Phantom power requirements: 48V DC, 3mA typical
• Polar pattern: Cardioid
• Pop filter: Metal, Snap-On
• Sensitivity (microphone): -38± 3dBV (1V/Pa at1kHz)
• Shock mount: Built-in
• Signal-to-noise ratio: 75dB
• Width: 102mm
• Weight: 376g
• Weight (Shock mount and pop filter): 127g
• Total Weight: 503g

• Condenser Mic
• HyperX Shield Pop Filter
• Mount Adapter
• Quick Start Guide