Eaton 5SC1500IR 1500VA Line Interactive 2U Rack UPS

The LCD interface provides clear status of the UPS key parameters such as input and output voltage, load and battery level, and estimated runtime. Essential configuration capabilities are also offered for output voltage, audible alarm and sensitivity. The 5SC offers USB and serial connectivity. The USB port is HID-compliant for automatic integration into Windows, Mac OS and Linux. A slot for an optional communication card (including SNMP/ Web card or relay contact card) is available on a rack and R/T models. Eaton’s Intelligent Power® Software Suite ensures compatibility with all major OS including virtualization software.

• Pure sinewave output: When operating in the battery, mode the 5SC provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.
• Buck and Boost operation corrects a wide range of input voltage variations through continuous regulation, without the use of batteries.
• Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging system that extends battery life by up to 50%.
• Designed to fit into short depth wall enclosures down to 500mm, 2 post racks or to be wall-mounted.
• Rail kits and ANZ Input cord are included as standard.
• Easy battery replacement from the front panel to extend UPS life.

Technical Specifications:

• Rating (VA/W): 1500VA/1050W
• Format: Rack 2U

Electrical characteristics:

• Technology: Line-interactive High Frequency (Sinewave, Booster, Fader)
• Input voltage range without using batteries: 184~276V
• Output voltage and frequency: 230V (-10/+6 %) (Adjustable to 220/230/240 V), 50/60 Hz ± 1Hz (Autosensing)

Connections:

• Input: 1 IEC C14 (10A)
• Outputs for Rack or R/T models: 8 IEC C13 (10A)

Batteries:

• Typical backup times @50 and 70% load: 13/08/
• Battery management: ABM, automatic battery test, deep discharge protection

Communication:

• Communication ports: 1 USB port + RS232 serial port (USB and RS232 cannot be used simultaneously) ROO/RPO + card slot for Network-M2 card or Relay-MS card

Operating conditions, standards and approvals:

• Operating temperature: 0°C~40°C
• Noise level: < 45dB
• Safety: IEC/EN 62040-1, UL1778
• EMC: IEC/EN 62040-2
• Approvals: CE /CB report (TUV), cTUVus, RCM

Dimensions:

• Dimensions (H x W x D): 86.2 x 440 x 405mm
• Weight: 17.8kg