Eaton 5P 650VA/420W 4 x Outlets Line Interactive 1U Rackmount UPS

The new Eaton 5P is the next generation of 650VA-1550VA line-Interactive UPS with advanced LCD and energy metering feature. 5P is the perfect UPS to protect IT & networking devices such as servers, switches, routers and storage devices, in tower or rack format.

Features:

• The graphical LCD display provides clear information on the UPS's status and measurements on a single screen. Enhanced configuration capabilities are also available with easy-to-use navigation keys.
• Meters energy consumption and provides kWH values through the LCD and Intelligent Power Software
• Load segment control enables prioritised shutdows of nonessential equipment to maximise battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.
• With an optimised electrical design, the 5P can provide a high quality output signal for any sensitive equipment connected, such as active PFC servers.
• 5P is available as a tower or rack form factor to cater for varied deployment applications
• Stronger longer battery life: Eaton ABM battery management technology uses an innovative three-stage charging technique that only recharges the battery when necessary, so the battery experiences less corrosion and service life is prolonged by up to 50%
• Batteries can be hot-swapped without ever having to shut down connected equipment. With an optional hot-swap maintenance bypass module, you can even replace the entire UPS.

Ideal for Protecting:

• Servers
• Switches
• Routers
• Storage devices

Specifications:

• Topology: Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
• Configuration: Rack 1U
• Rating (VA/Watts): 650/420
• Dimensions (H x W x D): 43.2 x 438 x 364mm
• Weight: 8.6kg
• Connection: (1) IEC-320-C14
• Input Voltage Without Using Batteries: 160V-294V (adjustable to 150V-294V)
• Input frequency Range Without Using Batteries: 47 to 70Hz (50 Hz system), 56.5 to 70Hz (60 Hz system), 40Hz in low-sensitivity mode
• Voltages: 230 V (+6/-10 %) (Adjustable to 200V / 220V / 230V / 240V)
• Output Receptacles: (4) IEC-320-C13
• Remotely controlled sockets: 2 groups of C13 (10 A) output receptacles, grouped 1+1
• Output Frequency: 50/60 Hz +/- 0.1 % (autosensing)
• Battery Management: ABM & temperature compensated charging method (user selectable), automatic battery test, deep discharge protection
• Cold start (No mains power): Yes
• User Interface: 3 LEDS + Multilingual LCD : access to measures, alarm messages and customization
• Communication Ports: 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously), 1 mini-terminal block for remote ON/OFF and Remote Power Off
• Communications Card Slots: 1 slot for Network-MS card, ModBus-MS or Relay-MS cards
• Audible Noise: < 40 dBA
• Operating Temperature: 0 to 35°C
• Safety markings: IEC/EN 62040-1
• EMC Markings: IEC/EN 62040-2 class B (EMC), IEC/EN 62040-3 (performance), C-Tick
• Approvals: CE, CB report
• Quality: Designed, manufactured and marketed under ISO9001 & ISO14001 quality system

Package Contents:

• 5P UPS
• Eaton Intelligent Power Software CD
• USB cable
• Serial cable
• Safety guide
• Quick start guide
• CD with 10-language user manual