Datalogic QuickScan L QD2330 1D USB Standard Range Handheld Barcode Scanner with Stand - White

Contains: Handheld Laser Scanner White, Handsfree Stand and USB Cable

Overview:

General Purpose Corded Handheld Laser Bar Code Reader
The QuickScan reader series is Datalogic Scanning’s value line of general purpose handheld data collection products. As an entry level scanner, the QuickScan L scanner provides a simple solution for those who prefer laser scanning technology and need to read bar codes at nominal distances. A wider than usual scan angle provides the
ability to read a longer bar code from a shorter distance.

Perfect for use in retail and office environments, its small, lightweight and ergonomic design is comfortable to use during daily operations. The QuickScan L reader has snappy reading performance and is capable of reading a wide range of symbologies including the majority of 1D codes plus GS1 DataBar linear codes.

The QuickScan L reader has been designed with durability in mind. One of the most vulnerable features of any scanner is damage to the scan window. When such incidents happen, the scanner may have to be replaced. The QuickScan L reader was specifically designed so that a replacement window pack can be ordered to replace damaged or scratched windows without having to send the scanner away for repairs. This helps to reduce the total cost of ownership during the life of the scanner and helps to ensure that it is always available for use.

Features:

• Wider scan angle for longer code reading
• User replaceable scan window
• Supports GS1 DataBar linear codes
• Water and Particulate Sealing Rating: IP42
• Drop resistance to 1.5 m
• 20 kV Electrostatic protection (air discharge)

Specifications:

Decoding Capability

• 1D / Linear Codes: Autodiscriminates all standard 1D codes including GS1 Databar linear codes
• Postal Codes: China Post

Electrical

• Current: Operating (Typical): 100 mA @ 5 VDC ; Standby/Idle (Typical): < 35 mA
• Input Voltage: 5 VDC +/- 10%

Environmental

• Ambient Light: 64,575 lux
• Drop Resistance: Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface
• ESD Protection (Air Discharge ) 20 kV
• Humidity (No n-Condensing) 5 - 95%
• Particulate and Water Sealing: IP42
• Temperature: Operating: 0 to 50 °C ; Storage/Transport: -40 to 70 °C
• Interface: USB

Physical Characteristics

• Colors Available: White
• Dimensions: 17.0 x 7.1 x 6.6 cm
• Weight: 127.6 g

Reading Performance

• Light Source: 650 nm VLD
• Print Contrast Ratio (Minimum): 30%
• Read Rate (Maximum): 100 reads/sec.
• Reading Angle: Pitch: +/- 65°; Roll (Tilt): +/- 30°; Skew (Yaw): +/- 60°
• Reading Indicators: Beeper (Adjustable Tone); Good Read LED
• Resolution (Maximum): 0.130 mm / 5 mils

Reading Ranges

• Typical Depth of Field: Minimum distance determined by symbol length and scan angle.
• Printing resolution, contrast, and ambient light dependent.
• 5 mils: 2.0 to 13.0 cm / 0.8 to 5.1 in
• 7.5 mils: 1.0 to 20.0 cm / 0.4 to 8.0 in
• 10 mils: 0.5 to 22.0 cm / 0.2 to 8.6 in
• 13 mils: 0.5 to 24.5 cm / 0.2 to 9.8 in
• 20 mils: 3.0 to 27.0 cm / 1.2 to 10.5 in

Safety & Regulatory

• Agency Approvals: The product meets necessary safety and regulatory approvals for its intended use.
• The Quick Reference Guide for this product can be referred to for a complete list of certifications.
• Environmental Compliance: Complies to China RoHS; Complies to EU RoHS
• Laser Classification Caution Laser Radiation - Do not stare into beam; EN 60825-1 Class 2; IEC 60825-1 Class 2

Warranty

• 3-Year Factory Warranty