D-Link DGS-1100-24PV2 24-Port Gigabit PoE Smart Managed Switch

The DGS-1100 Series is a range of powerful switches that offer a lot of bang for your buck. They are great for busy SMBs who expect a lot of their network, including support for surveillance and VoIP. They are packed with traffic management & optimization features that keep your network congestion free. Meanwhile, management tools are flexible and intuitive, making your life easier.

Easy to Use & Easy to Install:
D-Link Network Assistant Utility (DNA) can quickly discover and do initial setup for D-Link Networking devices such as the DGS-1100 Series, which greatly improves efficiency for solution deployment.

VLANs: Stronger Security & Better Traffic Management:
Relatively easy to set up, VLANs can be a big boon for your network. They can isolate sensitive areas of your network, keeping them safe from those with malicious intent, or keeping bandwidth open for latency-sensitive traffic such as VoIP.

Actively Mitigating Downtime:
Round-the-clock surveillance footage is vital. If you have cameras attached to your network, you may have thought technical difficulties were a given. However, the PD-Alive feature actively mitigates device downtime. If a device is not working as expected, the switch can automatically reset them and get them back online. No need to turn them on and off again in the middle of the night.

Green Technology:
D-Link Green technology enables the DGS-1100 Smart Managed Switches to save power without sacrificing performance. Most of the models in the series utilize a fanless design, for silent and energy-efficient operation. All are IEEE 802.3az-compliant and feature Link Status detection and Time-Based PoE.

General:

• Hardware Version: A1
• Size: 11-inch desktop (rackmount kit included), 1U height
• Number of Ports: 12 x 10/100/1000 Mbps (PoE), 12 x 10/100/1000 Mbps

Performance:

• Switching Capacity: 48 Gbps
• Maximum Forwarding Rate: 35.71 Mpps
• MAC Address Table Size: 8K Entries
• Packet Buffer: 4.1 Mbits
• Flash Memory: 16 Mbytes

PoE:

• PoE Standard: IEEE 802.3af/802.3at
• PoE Capable Ports: Ports 1 to 12
• PoE Power Budget: 100 W (30 W max. per PoE port)

Physical:

• Standby Mode: 8.8 W
• Maximum Power Consumption: 131.5 W (PoE on), 19.5 W (PoE off)
• Power Input: 100 to 240 V AC, 50 to 60 Hz internal power supply
• MTBF: 255,003 hours
• Acoustics: 0 dB(A)
• Heat Dissipation: 107.5 BTU/hr
• Ventilation: Fanless
• EMI: FCC Class A, CE Class A, VCCI Class A, C-Tick, BSMI, CCC
• Safety: cUL, CE LVD, CB, BSMI, CCC

Environment:

• Operating Temperature: -5 to 50 °C (23 to 122 °F)
• Storage Temperature: -40 to 70 °C (-40 to 158 °F)
• Operating Humidity: 0% to 95% non-condensing
• Storage Humidity: 0% to 95% non-condensing

Dimensions:

• Weight: 2.00 kg
• Dimensions (W x D x H): 280 x 230 x 44 mm