ASUS ROG Thor 1200W 80 Plus Platinum III ATX Power Supply

The ROG Thor 1200W Platinum III delivers the ultimate power and stability demanded by gamers. A next-gen GaN MOSFET delivers superior efficiency, and "GPU-First" voltage sensing features a patented-intelligent voltage stabilizer, ensuring top-tier performance and stability. Meanwhile, there is Turbo Mode for maximum cooling when overclocking or for other demanding workloads. The ROG Thor 1200W Platinum III also features the signature Thor OLED display, now upgraded for easy magnetic attachment – it can be swapped to either side of the unit to accommodate fan-up or fan-down PSU

ATX 3.1 Compatible:
ATX 3.1 ushers in tighter voltage and current regulation standard for next-gen hardware - and the ROG Thor 1200W Platinum III arrives ahead of the curve with full compliance. A 16-pin PCIe cable capable of sending up to 600 watts of power to PCIe 5.1 graphics cards is bundled with this PSU, readying your build for the next gen.

ROG Heatsinks:
ROG heatsinks facilitate lower temperatures, longer component lifespan, and extended 0dB operation.

Dual-Ball-Fan Bearings:
Dual-ball bearings boast a remarkable lifespan of up to 80,000 hours, twice as long as sleeve bearings and exceeding even fluid dynamic bearings. This helps to ensure long-lasting and reliable cooling with minimal noise for the ROG Thor 1200W Platinum III.

0dB Technology:
To reduce noise output, the PWM-controlled fan shuts off entirely when the PSU load is at 30% or below.

Magnetic OLED Display:
This detachable magnetic OLED display showcases real-time power draw, providing insights to your system's performance and efficiency. The magnetic attachment can be swapped to either side of the unit for fan-up or fan-down PSU installation, depending on the design of your case, so you can maintain optimal airflow without compromising monitoring.

Turbo Mode:
Turbo Mode unlocks support for extended power excursions, courtesy of a fine-tuned fan curve and premium components. Enjoy unwavering performance when you need it most, and switch between peak performance and ultimate silence with just a press of the Turbo Mode button on the rear of the PSU.

Etched Cables:
Made from a pliable premium material, these etched cables are easily flexible during installation, and they operate at temperatures 50°C lower than the safety limit when routed for cable management. These cables also meet the rigorous standards of the UL1581 flame test and UL758 certification, helping to ensure a smooth PC DIY experience and exceptional safety.

• Model: ROG Thor 1200W Platinum III
• Intel Specification: ATX12V
• PFC Type: Active PFC
• ATX Standard: ATX 3.1
• Dimensions: 190 x 150 x 86 mm
• Efficiency: 80Plus Platinum
• MTBF: > 120,000 hrs @ 25°C
• Protection Features: OPP/OVP/UVP/SCP/OCP/OTP
• Hazardous Materials: ROHS
• AC Input Range: 100-240Vac
• DC Output Voltage: +3.3V +5V +12V -12V +5Vsb
• Maximum Load: 30A 25A 100A 0.3A 3A
• Combined Load: 125W 125W 1200W 3.6W 15W
• Total Output: 1200W
• Cable Connectors: MB 24/20-pin x 1, CPU 4+4-pin x 2, PCI-E 16-pin x 1, PCI-E 6+2-pin x 4, SATA x 7, PERIPHERAL x 6
• Weight, 2.37 KG (single PSU)
• AURA SYNC, ARGB
• Cybenetics Noise Level Certification, A++
• 0dB Technology, Supported. The fan shuts off entirely when the PSU is under certain load
• 0dB Fan Button, Yes. When the Button is ON, the fan will only spin up when the system reaches a certain load. When the Button is OFF, the fan will continuously spin at all load levels.

• Power Cord x 1
• Motherboard Power Cable x 1 (610mm)
• CPU Cable x 2 (1000mm)
• PCI-E Gen 5.1 16-pin Cable x 1 (750mm)
• PCI-E Cable 1-to-1 x 4 (750mm)
• SATA Cable 1-to-4 x 1 (400+120+120+120mm)
• SATA Cable 1-to-3 x 1 (400+120+120mm)
• Peripheral 1-to-3 x 2 (400+150+150mm)
• Addressable RGB Cable x 1 (800mm)
• ROG sticker x 1
• ROG cable tie x 6
• Chassis Screws Package x 1
• Cable Tie x 12
• User Manual x 1