Cisco Meraki MR70 Basic 2x2:2 Wi-Fi 5 Wireless Cloud Managed Outdoor Access Point

The Cisco Meraki MR70 is a dual-radio, cloud-managed 2x2:2 802.11ac Wave 2 access point with MU-MIMO support. Designed for basic, best-effort deployments that require rapid installation, the MR70 provides enterprise-grade security and simple management in a ruggedized, IP67-rated form factor that sports integrated omni-directional antennas.

• 2x2 MU-MIMO 802.11ac Wave 2
• 1.3 Gbps* aggregate dual-band frame rate
• Integrated enterprise security and guest access
• Built-in WIPS for threat detection and remediation
• Application-aware traffic shaping
• Self-configuring, plug-and-play deployment
• Rapid, plug-and-play deployment
• Integrated location analytics and heat map

Radios:

• 2.4 GHz 802.11b/g/n client access radio
• 5 GHz 802.11a/n/ac Wave 2 client access radio
• Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz, 5.150-5.250 GHz (UNII-1), 5.250-5.350 GHz (UNII-2), 5.470-5.600, 5.660-5.725 GHz (UNII-2e), 5.1725-5.825 GHz (UNII-3)

802.11ac & 802.11n Capabilities:

• 2×2 multiple input, multiple output (MIMO) with two spatial streams
• SU-MIMO and MU-MIMO support
• Maximal ratio combining (MRC) and beamforming
• 20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (5 GHz)
• Up to 256 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation

Power:

• Power over Ethernet: 37-57 V (802.3af compatible)
• Alternative 12 V DC input
• Power consumption: 11 W max (802.3af)
• Power over Ethernet injector sold separately

Mounting:

• Mounts to walls and vertical poles
• Mounting hardware included

Physical Security:

• Security screw included

Environment:

• Operating temperature: -20 °C to 55 °C
• IP67 environmental rating
• Operating humidity: 5% to 95%

Physical Specifications:

• Dimensions: 245 mm × 115 mm × 30 mm
• Weight: 0.45 kg

Antennas:

• Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz, 4.7 dBi gain at 5 GHz)

Interfaces:

• 1× 100/1000 BASE-T Ethernet (RJ45)

Security:

• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• VLAN tagging (802.1Q) and tunnelling with IPSec VPN
• PCI compliance reporting
• WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration
• Cisco ISE integration for guest access and BYOD posturing

LED Indicators:

• 1 power/booting/firmware upgrade status

Note: Meraki Enterprise license required