DAHLE 514 High Volume 19 Sheet 140L P-5 Micro Cut Document Shredder

A high-volume document shredders for maximum performance to meet high expectations.. Convenient swivel casters with brake for reliably keeping the document shredder firmly in place. With automatic motor cut-out after 30 minutes without use.

• Convenient feed and reverse function for manual control
• Convenient automatic reversing function clears feed opening after feeding in too much paper
• Automatic shredding stop and optical signal in control panel when bin full
• Motor cuts out automatically when waste bag is full or door is open
• Separate CD feed opening and waste box for reliable, environmentally friendly shredding
• Innovative MHP (Matrix High Performance) cutters: high-quality compound steel cutters that are guaranteed to last
• Patented manufacturing process preserves resources by considerable saving of raw materials compared to a conventional production of cutting cylinders
• With automatic motor cut-out after 30 minutes without use
• Powerful motor for high capacity and longer running times
• Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
• Electronic start-stop function controlled by integrated light barrier
• Extremely quiet operation for a particularly pleasant working atmosphere
• Widely opening doors for ease of emptying the waste bag
• Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
• Separate main switch for completely shutting down the document shredder
• Practical IEC power connector can be unplugged from the document shredder
• High volume department document shredder
• More performance by MHP cutting cylinders

• Entry width: 310 mm
• Shreds A4 80 gsm paper: 17 ~ 19 sheets
• Shred width in mm: 2 x 15 mm
• Security levels: P-5/F-2/O-4/T-5/E-4
• Waste collection volume: 140 L
• dB (A) when idle: 53 dB(A)
• Speed: 4.8 m/min
• Wattage: 900 W
• Dimensions (H x W x D): 890 x 734 x 511 mm
• Weight (approx.): 68.5 kg

Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.