Cisco Meraki MR76 High Performance 2x2:2 Wi-Fi 6 Wireless Cloud Managed Outdoor Access Point

The Cisco Meraki MR76 is a cloud-managed 2x2:2 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR76 offers high throughput, enterprise-grade security, and simple management.

• 2x2:2 MU-MIMO 802.11ax
• 1.7* Gbps dual-radio aggregate frame rate
  (* Refers to maximum over-the-air data frame rate capability of the radio chipset, and may exceed data rates allowed by IEEE 802.11ax operation.)
• 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
• Integrated Bluetooth Low Energy Beacon
• Integrated scanning radio
• Enhanced transmit power and receive sensitivity
• Integrated enterprise security and guest access
• Application-aware traffic shaping
• Optimised for voice and video
• Self-configuring, plug-and-play deployment
• Sleek design blends into office environments
• Full-time Wi-Fi location tracking via dedicated 3rd radio

Radios:

• 2.4 GHz 802.11b/g/n/ax client access radio
• 5 GHz 802.11a/n/ac/ax client access radio
• 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
• Max data rate 1.7 Gbit/s
• Operating Bands (country-specific restrictions apply): 2.412-2.484 GHz, 5.150-5.250 GHz (UNII-1), 5.250-5.350 GHZ (UNII-2), 5.470-5.600 GHz, 5.650-5.725 GHz (UNII-2e), 5.725-5.825 GHz (UNII-3)

802.11ax, 802.11ac Wave 2, and 802.11n Capabilities:

• UL/DL OFDMA, TWT support, BSS colouring
• 2×2 multiple input, multiple output (MIMO) with 2 spatial streams
• UL/DL SU-MIMO and MU-MIMO Support
• Maximal ratio combining (MRC) & Beamforming
• 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
• Up to 1024 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation

Power:

• Power over Ethernet: 37 - 57 V (802.3af compatible)
• Power consumption: 15 W max
• Power over Ethernet injector sold separately

Mounting:

• Mounts to walls and horizontal, vertical, and angled poles
• Mounting hardware included

Physical Security:

• Security screw included
• Anti-tamper cable bay
• Concealed mount plate

Environment:

• Operating temperature: -40 °C to 55 °C
• Humidity: 5 to 95% non-condensing
• IP67 environmental rating (sealed against water and dust)

Interfaces:

• 1x 10/100/1000 BASE-T Ethernet (RJ45)

Physical Specifications:

• Dimensions: 30.0 cm X 15.3 cm X 5.5 cm, not including cable gland, mounts or antennas
• Weight: 1.34 kg

Security:

• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• WEP**, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
  (** software features can be enabled via firmware updates)
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
• PCI compliance reporting
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
• Cisco ISE integration for Guest access and BYOD Posturing

Quality of Service:

• Advanced Power Save (U-APSD)
• WMM Access Categories with DSCP and 802.1p support
• Layer 7 application traffic identification and shaping

Mobility:

• PMK, OKC, & 802.11r for fast Layer 2 roaming
• 802.11r and 802.11k
• Distributed or centralized layer 3 roaming

LED Indicators:

• 4 signal strength
• 1 Ethernet connectivity
• 1 power/booting/firmware upgrade status

Note: Meraki access point license required.