Honeywell Xenon 1902G-BF 2D Standard Range Bluetooth USB Scanner - Black

The Honeywell Xenon 1902g-bf area-imager scanner is Honeywell’s latest barcode scanner powered by super-capacitors – eliminating the battery for a green, environmentally friendly scanner. This powerhouse solution is capable of scanning over 450 barcodes on a single charge, and can be recharged in less than 60 seconds via a powered USB port.

Powerful, Battery-Free Scanning
• When fully charged, typically scans over 450 UPC/EAN codes without the need for recharging – enough to check out at least 25 customers during peak periods.

Advanced Super-Capacitor Technology
• Super-capacitors hold their charge for hours when fully charged. So operators who forget to place the scanner in the charger prior to break won’t impact operations upon return.

Fast Recharging
• Fully charges in under two minutes with a simple USB connection, and under 30 seconds when a powered USB or external power supply is used.

Quick Get-Up-and-Go
• Completely out of power? Just place the scanner in the base. In less than 20 seconds, the LED will flash to notify you that there is sufficient power to support over 100 scans.

Configurable, Convenient Low-Battery Alerts
• Two configurable recharge alerts remind you to place the scanner back into the base for charging – and can be set to trigger at different levels of discharge and urgency.

Battery-Free:
• Number of Scans (based on default settings): Fully Charged: Typically more than 450 scans; Ready-to-Go Notification: At least 25 scans (@1 scan/sec)
• First Recharge Alert (30%): Typically occurs after 300 scans ±10%
• Second Recharge Alert (10%): Typically occurs after 400 scans ±10%
• Expected Full Charge Time (completely discharged): Standard USB: Typically under 120 seconds; Powered USB/External Wall Power Adapter: Typically under 30 seconds
• Expected Ready-to-Go Charge Time: Standard USB: Typically under 25 seconds; Powered USB/External Wall Power Adapter: Typically under 15 seconds
• Use Time (5 scans/transaction, 1 min/transaction): Fully Charged: Typically 25 minutes of usage
• Ready-to-Go Notification: Typically 5 minutes of usage left
• First Recharge Alert (flashing yellow LED): Typically 10 minutes of usage left
• Second Recharge Alert (flashing red LED): Typically 5 minutes of usage left
• Charge Cycles (from completely discharged): 500,000

Wireless:
• Radio/Range: 2.4 GHz to 2.5 GHz (ISM Band) Adaptive Frequency Hopping Bluetooth V4.2 Class 2/10 m (33 ft)
• Data Rate: 130 Kbps

Mechanical/Electrical:
• Operating Power: 5W (1A @ 5V)
• Non-Charging Power: 0.5W (0.1A @ 5V)
• Host System Interface: USB, Keyboard Wedge, RS-232, IBM 46xx (RS485)
• Dimensions - Scanner: 104 mm x 71 mm x 160 mm
• Weight - Scanner: 195 g
• Dimensions - Charge and Communication Base: 132 mm x 102 mm x 81 mm
• Weight - Charge and Communication Base: 180 g

Environmental - Scanner:
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -40°C to 70°C
• Humidity: 0 to 95% relative humidity, non-condensing
• Drop: Designed to withstand 50 1.8 m (6 ft) drops to concrete
• Environmental Sealing: IP42
• Light Levels: 0 to 100,000 lux (9,290 ft-candles)

Environmental - Charge and Communication Base:
• Operating Temperature: Charging: 0°C to 50°C; Non-Charging: 0°C to 50°C
• Storage Temperature: -40°C to 70°C
• Humidity: 0 to 95% relative humidity, non-condensing
• Drop: Designed to withstand 50 1 m (3.3 ft) drops to concrete
• Environmental Sealing: IP41

Scan Performance:
• Scan Pattern: Area Image (838 x 640 pixel array)
• Motion Tolerance: Up to 610 cm/s (240 in/s) for 13 mil UPC at optimal focus
• Scan Angle: (SR) Horizontal: 42.4°; Vertical: 33° (HD) Horizontal: 41.4°; Vertical: 32.2°
• Symbol Contrast: 20% minimum reflectance difference
• Pitch, Skew: ±45°, ±65°
• Decode Capability: Reads standard 1D, 2D

• Honeywell 1902 Scanner (1902gSR-2-BF-A)
• Charge & communication base (CCB01-010BT-07N-BFA)
• USB Type A 3m straight cable (CBL-500-300-S00)
• Battery free