TP-Link EAP235-Wall Omada AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point

11ac Wi-Fi for the Best Room-by-Room Connection. Ready for Omada SDN controller for centralized management and monitoring. Ultra slimmest and conspicuous design blends the access point into the walls of hotel rooms, hospitals, offices, and dormitories.

Dedicated Complete, Private Wi-Fi Network in Each Room:
An EAP in each room allows guests to enjoy their own private Wi-Fi network that’s fast, delivering a strong signal, and providing corner to corner coverage.

Absolute Thinnest, Inconspicuous Design:
The thinnest wall plate AP available—only 15 mm—featuring a sleek, minimalist appearance. Designed to blend in with the décor of hotel rooms, hospitals, offices and school dormitories, to deliver powerful Wi-Fi without clashing with the room.

Effortless Deployment with PoE Powered:
With 802.3af/802.3at Power over Ethernet supported there’s no need to install additional wiring in the building. Simply plug in existing Ethernet cables and you’re ready to go.

Quick, Simplified Installation:
EAP235-Wall is easy to install, so extra cost, time, or professional knowledge are completely unnecessary.

Full Gigabit Ports to Bridge Network:
Equipped with four Gigabit data ports (1x uplink + 3 x downlink), one downlink port offering PoE pass-through, to connect multiple devices to your gigabit network. Wired devices like VoIP phones can be powered with no need for extra electrical cables.

Omada SDN—Smarter Cloud Solution for Business Networking:
Omada Software Defined Networking (SDN) platform integrates network devices including access points, switches and gateways, guaranteeing powerful business network with higher efficiency, higher security, and higher reliability.

Easy Management with the Omada App:
Follow configuration instructions on the Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet.

Hardware:
• Interface: Uplink port: One 10/100/1000 Mbps Ethernet Port, accepts 802.3af or 802.3at PoE, Access ports: Three 10/100/1000 Mbps Ethernet Ports with one PoE power pass-thru port
• Physical Security Lock: Yes
• Button: Reset
• Power Supply: 802.3af/802.3at PoE
• Power Consumption: 9.8 watts, 24.4 watts with 13w PoE output
• Dimensions ( W x D x H ): 143 × 86 × 20 mm
• Antenna Type: 2.4GHz: 2x 4dBi, 5GHz: 2x 4dBi
• Mounting: Wall Plate Mounting

Wireless:
• Wireless Standards: IEEE 802.11a/b/g/n/ac
• Frequency: 2.4GHz and 5GHz
• Signal Rate: 5GHz:Up to 867Mbps, 2.4GHz:Up to 300Mbps
• Wireless Functions: 16 SSIDs (Up to 8 SSIDs on each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Band Steering, Load Balance, MU-MIMO, Airtime Fairness, Beamforming, Rate Limit, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client
• Wireless Security: Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support
• Transmission Power: CE: < = 21 dBm (2.4 GHz), < = 21 dBm (5 GHz)

Management:
• Omada App: Yes
• Centralized Management: Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller
• Cloud Access: Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller)
• Email Alerts: Yes
• LED ON/OFF Control: Yes
• Management MAC Access Control: Yes
• SNMP: v1,v2c
• System Logging Local/Remote Syslog: Local/Remote Syslog
• SSH: Yes
• Web-based Management: HTTP/HTTPS
• L3 Management: Yes
• Multi-site Management: Yes
• Management VLAN: Yes

Environment:
• Operating Temperature: 0°C ~ 60°C
• Storage Temperature: -40°C ~70°C
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing