PowerShield Centurion Tower 1000VA Double Conversion True Online UPS

The Centurion is designed to protect critical computer, communications, industrial, medical and other mission critical equipment. A true online double conversion UPS, the Centurion is designed to guarantee trouble-free operation of protected equipment in any harsh electrical environment. Versatile management and hardware options offer the flexibility to build up a power protection solution to fit any application. This range now comes with two sets of sockets on the back, one row of output sockets are programmable meaning that you can shed less important loads. This will leave additional valuable back up time to the equipment that is most critical. This UPS includes a stylish, informative LCD display.

• True Online Double Conversion
• Wide input voltage range (110-300 VAC)
• Input power factor correction 0.98
• 50Hz/ 60Hz frequency converter mode
• Programmable power outlets
• Emergency power off function (EPO)
• Optional Eco-mode operation for energy saving
• Generator compatible
• Backup time for all models is easily extended by simply plugging additional battery banks
• Charger capacity expansion to 9A for long-run models
• USB, RS232, SNMP and AS400 multiple communications available
• External maintenance bypass available for all models
• N + X parallel redundancy available for 6K/ 10K models
• Monitoring and Shutdown Software include

General:
• Capacity: 1000VA / 800W
• Type: True online double-conversion

Input:
• Low Line Transfer: 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % (based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
• Low Line Comeback: 175 VAC ± 5 %
• High Line Transfer: 300 VAC ± 5 %
• High Line Comeback: 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
• Frequency Range: 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
• Phase: Single phase with ground
• Power Factor: 0.98

Output:
• AC Voltage Regulation: ± 3%
• Frequency Range (Synchronized Range): 48 ~ 52Hz or 57 ~ 63Hz
• Frequency Range (Batt. Mode): 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
• Load Crest Factor: 3:1
• Harmonic Distortion: 3 % THD (Linear Load); 6 % THD (Non-linear Load)
• Transfer - AC Mode to Batt. Mode: Zero
• Transfer - Inverter to Bypass: 4ms
• Waveform (Batt. mode); Pure Sinewave

Efficiency:
• ECO Mode: 85%
• Battery Mode: 83%

Battery:
• Type: 12V*9AH(x3)
• Typical Recharge Time: 4 hours recover to 90% capacity
• Charging Current (Max): 1.0A
• Charging Voltage: 41.0 VDC ± 1%

Protection:
• Overload
• Discharge
• Thermal
• Short circuit
• Overcharge protection

Communications & Management:
• Interface: USB or RS232 as standard, Intelligent slot for PSSNMP or PSAS400 dry contact
• Software: Power Shield NetGuard Software - supports Windows based operating Systems, Linux, Unix & Mac
• LCD Display/ Alarm: UPS Status, Load Level, Battery Level, Input/Output Voltage, Battery Time Remaining and Fault Indicators
• Audible Alarm: Battery Mode, Low Battery, Overload, Fault

Compliance:
• Safety: EN62040-1-1 2003, IEC60950-1-1
• EMS: EN62040-2 2006
• RoHS: Directive 2001 / 65 / EU

Physical Specifications:
• Dimension (D x W x H): 396 x 145 x 240mm
• Weight: 14kg
• Operating Temperature: 0- 40°C
• Operating Humidity: 20-90 % (RH Non-condensing)
• Noise Level: Less than 45dBA @ 1 Meter