Netcomm NTC-6200-02 3G M2M Serial Modem Router
The 3G M2M Router series (NTC-6200) delivers state-of-the-art M2M connectivity to a broad range of applications. The all-new NTC-6200 series brings together the choice of 3 powerful gateways with different connectivity options so you can choose the best gateway to suit your individual requirements. Designed with durability, ease of use and added intelligence, the NTC-6200 is designed to utilise the freedom of wireless networks to deliver seamless M2M connectivity.
The NTC-6200 series connects to worldwide 3G networks at speeds of up to 14.4Mbps. With no dependence on a landline, these routers can be deployed in any location to allow remote access, monitoring and control of connected devices. Featuring Ethernet, Serial (RS232/422/485), and USB 2.0 connectivity, the NTC-6200 series can interface with a diverse range of equipment used in a wide variety of vertical applications.
The built-in GPS can be used for applications that are mobile where the router can be traced and tracked to see the location of connected devices.
The 3 multipurpose I/O ports can be used to attach a number of sensors that can relay information about the physical environment. One I/O port is a dedicated ignition input that can power the router when a vehicle is started providing further powering flexibility.
• PROCESSOR & STORAGE:
Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram 256MByte Flash memory storage (~120MB available on board space for user storage)
• OPERATING SYSTEM:
Embedded Linux 3.6
• PEAK DATA SPEED:
HSDPA/HSUPA data rates: DL: 7.2 / 14.4 Mbps, UL: 2.0 / 5.76 Mbps (Concurrent data rate: DL: 7.2 Mbps, UL: 5.76 Mbps)
UMTS data rates: DL: max. 384 kbps, UL: max. 384 kbps
EDGE class 12: DL: max. 237 kbps, UL: max. 237 kbps
GPRS class 12: DL: max. 85.6 kbps, UL: max. 85.6 kbps
CSD data transmission: 14.4 kbps, V.110
• CELLULAR BANDS:
UMTS/HSDPA/HSUPA: 800/850/900/2100/1900 MHz
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
1x (RJ-45) 802.3af Power over Ethernet (PoE)1 10/100Base-TX Port with Auto MDIX
1x RS232 Serial Port DB-9 female DCE supporting either 9 wire RS232 or RS485/RS422 (software selectable).
Software controlled termination resistors for RS485
Mini USB 2.0 OTG interface with 0.5A supply capability
3x Multipurpose I/O pins**
• I/0 PINS:
NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input
Analogue 0V to 30V input
Digital input (through measurement of voltage above/below threshold)
Open collector output
• SIM CARD READER:
Lockable Tray Reader with Push-Button-to-Release
Supports Mini USIM/SIM Format (2FF)
• ANTENNA CONNECTORS:
2x SMA connectors for 2G/3G (1x Main and 1x RX Diversity)
1x SMA connector for GPS**
• DIMENSIONS, WEIGHT & MOUNTING:
Device dimensions (excluding external antenna): 143mm (L) x 107mm (W) x 34mm (D) / 221g (254g with bracket)
Wall mount support in multiple orientations via embedded mounting holes
DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)