Netcomm NTC-100-01 4G LTE Cat M1/NB1 IoT Serial Modem

Cat M1/NB1 4G LTE, Robust industrial design for reliable long-term deployment in harsh environments, Designed for space-constrained installations, Software configurable serial port (RS232/RS422/RS485), USB 2.0 device port

• Cat-M1 and Cat-NB1 support perfect for transmitting the small amounts of data, providing low power wide area connectivity even in hard to reach areas
• Powerful cellular connectivity supporting 4G LTE
• A 10-pin NANO-fit connector providing a serial interface (RS232 / RS485 / RS422)
• Advanced diagnostics and control to query status information, configure a device and execute various commands via SMS
• Firmware upgrade over the air
• Industrial grade design with wall mount option

• Antenna Connectors: 1x SMA Connector
• UE Category: Cat M1/NB1 3GPP E-UTRA Release 13
• Cellular Bands: LTE-FDD: – Band 1 (2100 MHz) – Band 2 (1900 MHz) – Band 3 (1800 MHz) – Band 4 (1700 MHz) – Band 5 (850 MHz) – Band 8 (900 MHz) – Band 12 (700 MHz) – Band 13 (700 MHz) – Band 18 (850 MHz) – Band 19 (850 MHz) – Band 20 (800 MHz) – Band 28 (700 MHz) LTE-TDD: – Band 39 (1900 MHz, Cat. M1 only) EGPRS: – 850 MHz – 900 MHz – 1800 MHz – 1900 MHz
• Peak Data Speed: Cat M1: – 375 Kbps/375 Kbps (Downlink/Uplink) Cat NB1: – 32 Kbps/70 Kbps (Downlink/Uplink) GPRS: – 107 Kbps/85.6 Kbps (Downlink/Uplink) EDGE: – 296 Kbps/236.8 Kbps (Downlink/Uplink)
• Interface: 1x SIM card slot (2FF) 1x USB 2.0 (Device only) – Micro-B receptacle 1x 10-pin NANO-fit (locking) connector providing Serial interface (RS-232/RS-422/RS-485) – 15kV RMS Protection
• LED Indicators: 2x Tri-colour (Red/Amber/Green) LEDs indicating: – Power – Network
• Reset Button Recessed reset button with two functions: – Reboot – Reset unit to factory defaults
• Modes of Operation: PPP IP Advanced diagnostics and control via SMS – Query status information - such as Signal Strength, WAN IP, uptime, and many more – Configure device remotely via SMS such as APN, authentication settings, and many more – Execute commands via SMS - such as reboot, reset to defaults, go offline, and many more – Secure SMS management using sender whitelisting and password protection – SMS acknowledgement replies for queries and commands
• Cellular Connection Management: Profile managed packet data connections SIM PIN protection Automatic and manual cellular band selection Automatic and manual operator selection
• Firmware Management: Firmware upgrade locally via USB or remotely Over-The-Air Triggered firmware upgrade via SMS (initiate download & install from FTP)
• Power Supply: Power input via 10-pin NANO-fit connector DC Power input (4.5 – 36 V DC) Minimum power input rating of 4 W
• Temperature & Humidity: Operating temperature range: -30ºC to +70ºC Storage temperature range: -40ºC to +85ºC Non-condensing humidity: 5-95% RH @ 60ºC
• Enclosure: P40 rated
• Dimensions (wxlxd): 84 mm x 50 mm x 21 mm
• Mounting Options: Wall mountable via mounting holes DIN Rail mount support via included plastic bracket (Top hat section rail TH 35 IEC60715)