Kingston ValueRAM 4GB 1600MHz DDR3 Non-ECC CL11 SODIMM 1.35V Memory

Kingston ValueRAM 4GB 1600MHz DDR3 Non-ECC CL11 SODIMM 1.35V Memory

● JEDEC standard 1.35V and 1.5V Power Supply
● VDDQ = 1.35V and 1.5V
● 800MHz fCK for 1600Mb/sec/pin
● 8 independent internal bank
● Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
● Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
● 8-bit pre-fetch
● Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
● Bi-directional Differential Data Strobe
● Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
● On Die Termination using ODT pin
● Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C
● Asynchronous Reset
● PCB: Height1.18” (30mm), double sided component
● Lead Free RoHS Complian

• Capacity: 4 GB
• Form Factor: SO-DIMM
• Frequency: 1600 MHz
• Series: Value RAM
• Warranty: Lifetime