Fractal Design Venturi Series HP-12 PWM 120mm Case Fan
The Venturi High Pressure Series PWM fans, HP-12 are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.
Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.
• Featuring true FDB-bearings, providing silent operation coupled with a long lifespan
• Equipped with a counter-balanced magnet that reduces the axial tension on the bearing
• Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber
• Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer
• Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators.
• Featuring PWM control with a very wide speed range, starting at only 400RPM (400 +/- 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature.
• Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence.
• Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
• The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
• Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
• Fan: HP-12 PWM
• Size [mm]: 120*120*25mm
• Colors available: Black blades, black corners, dark grey ("Gunmetal") frame
• Screw hole pattern: 105*105mm
• Connector: 4-pin fan header
• Bearing: FDB
• Number of blades: 7
• Rotational speed [RPM]: 1800
• Acoustical noise [dB (A)]: 31.7
• Maximum air flow [CFM]: 61.4
• Maximum air flow [m 3 /h]: 104.3
• Maximum pressure [mm H 2 O]: 2.3
• Actual input power [W]: 1.0
• Maximum rated input current [A]: 0.2
• Nominal input voltage [V]: 12V
• Minimum startup voltage [V]: 6V
• Low (0-20%) PWM speed: 400 RPM
• Low PWM Static pressure: 0.45 mm H2O
• Low PWM Air flow: 15.4 CFM, 26.2 m3/h
• Low PWM Noise level: < 10 dB (A)
• MTBF [hours]: 150,000
• Unit weight [g]: 179
• Package weight [g]: 225
• Cable length [mm]: 500
• Cable type: Braided all-black ribbon wire
• Packaging dimensions [mm] (Including hanging tab): 180*122*30
• Packaging dimensions [mm] (Excluding hanging tab): 147*122*30