Edimax GP-101ET IEEE 802.3at Gigabit PoE+ Extender

Power over Ethernet (PoE) is typically limited to a range of 100 meters due to cable capacity. For longer-distance PoE networking though, the GP-101ET PoE+ Extender is the perfect accessory – increasing capacity up to another 100 meters (328 ft). Its a 1-Port Gigabit PoE Extender with plug and play installation requiring neither configuration nor extra electrical power, and makes for an innovative and cost-effective PoE repeater that extends power and data for another 100 meters. Extend your network for a PD (Powered Device) such as WLAN access points, network cameras, IP phones and others, with Gigabit high-speed for greater deployment flexibility.

IEEE 802.3at/af Power over Ethernet Standard:
The GP-101ET Extender can be connected to any IEEE 802.3at/af end-nodes such as WLAN access points, network cameras, Voice over IP (VoIP) telephones and IP-based appliances where the IEEE 802.3at/af in-line Power over Ethernet port is supported.

Extended Range with Higher Cost Efficiency:
Enables the Ethernet cable to carry both data and power beyond the 100 meters limitation for another 100 meters. This reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall, ceiling or any unreachable place. Overall lower installation costs and simplified deployment efforts.

Plug & Play, Easy Installation:
No additional power supply or setup required for easy plug & play installation.

Reliable & Flexible Power Supply:
Featuring PoE short circuit protection to safeguard network devices and protect against damage.

Power over Ethernet:
• Standard: IEEE802.3af and IEEE802.3at
• Power Output: IEEE 802.3af
• Pin Assignment: PoE Input Port: 1/2(+), 3/6(-) End-Span; 4/5 (+), 7/8 (-) Mid-Span, PoE Output Port: 1/2(+), 3/6(-) End-Span
• PoE Power Output: 15.4W (IEEE 802.3af)

Environment:
• Operating Temperature: 0 ~ 40℃
• Storage Temperature: -40 ~ 70℃
• Operating Humidity (Non-condensing): 10 ~ 90%
• Storage Humidity (Non-condensing): 5 ~ 90%

Hardware:
• Ports: 1 Port RJ-45 10/100/1000Base-T Input Port, 1 Port RJ-45 10/100/1000Base-T PoE Output Port
• LED Indicators: Link/ACT and PoE
• Power Input: IEEE 802.3af, IEEE 802.3at
• Power Consumption: 1.2 Watts
• Dimensions (L x W x H): 86.8 x 79.3 x 25.8 mm
• Weight: 200g