Skip to main content
One of NZ’s biggest online shops for computer & office supplies
Show Category menu
Out Of Stock. Enquire for Availability

Cisco SG200-50 50-port Gigabit Smart Switch

Save $763 off RRP
Model: SLM2048T-AU Ask a question about this item
Cisco

Genuine NZ new item

Find out more...

Last Available Price:

$866.90incl gst

Free Delivery

Out Of Stock. Enquire for Availability

Delivery Timeframe

  • Auckland
    1 Day
  • North island
    1-2 Days
  • South island
    1-3 Days

Product Description:

Cisco SG200-50 50-port Gigabit Smart Switch

Cisco 200 Series Switches are a series of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a basic business network. These expandable Fast Ethernet or Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface and the Cisco Discovery Protocol, you can deploy and configure a rock-solid business network in minutes.

Performance

Gigabit Ethernet 48 x 10/100/1000 ports
2 x Gigabit Ethernet combo
Capacity in Millions of Packets per Second (mpps) (64-byte packets) 74.41
Switching Capacity in Gigabits per Second (Gbps) 100.0

Layer 2 Switching

Spanning Tree Protocol (STP) Standard 802.1d STP support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Port grouping
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups, Up to 4 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 128 VLANs simultaneously (out of 4096 VLAN IDs). 16 VLANs supported in SG200-08 and SG200-08P. Port-based and 802.1Q tag-based VLANs
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Internet Group Management Protocol (IGMP) versions 1 and 2 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
Head-of-line (HOL) blocking prevention

Security

IEEE 802.1X (Authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash
Port security Locks MAC addresses to ports, and limits the number of learned MAC addresses
Storm control Broadcast, multicast, and unknown unicast

Quality of Service

Priority levels 4 hardware queues
Scheduling Strict priority and weighted round-robin (WRR)
Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of service Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate limiting Ingress policer, per VLAN and per port

Standards

IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 2618

IPv6

IPv6 host mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 neighbor and roter discovery (ND)
IPv6 stateless address auto-configuration
Path maximum transmission unit (MTU) discovery
Duplicate address detection (DAD) Internet Control Message Protocol (ICMP) version 6
IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) support
IPv6 QoS Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD) snooping Deliver IPv6 multicast packets only to the required receivers
IPv6 applications Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client
IPv6 RFCs supported RFC 2463: ICMP version 6, RFC 3513: IPv6 address architecture, RFC 4291: IPv6 addressing architecture, RFC 2460: IPv6 specification, RFC 2461: Neighbor discovery for IPv6, RFC 2462: IPv6 stateless address auto-configuration, RFC 1981: Path maximum transmission unit (MTU) discovery, RFC 4007: IPv6 scoped address architecture, RFC 3484: Default address selection mechanism, RFC 4214: ISATAP tunneling, RFC 4293: MIB IPv6: Textual conventions and general group, RFC 3595: Textual conventions for IPv6 flow label

Management

Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring
Remote Monitoring (RMON) Embedded RMON software agent supports one RMON group (statistics) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration
Firmware upgrade Web browser upgrade (HTTP) and TFTP
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported.
VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported.
DHCP (Options 66 and 67) Dynamic Host Configuration Protocol (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download)
Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Smartports Simplified configuration of QoS and security capabilities
Cloud services Support for FindIT Network Discovery Utility
Localization Localization of GUI and documentation into multiple languages
Other management HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog

Power Efficiency

Energy Detect Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down
Active mode is resumed without loss of any packets when the switch detects the link is back up
Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m.

General

Jumbo frames Frame sizes up to 10 KB supported on 10/100 and Gigabit interfaces (9K for SG200-08 and SG200-08P)
MAC table Up to 8000 MAC addresses
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol
Power consumption 110V/0.569A/61.8W, 220V/0.296A/61.4W
Heat Dissipation 209.6
Buttons Reset button
Cabling type Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T
LEDs System, Link/Act, PoE, Speed
Flash 16 MB (8 MB in SG200-08 and SG200-08P)
CPU memory 128 MB (32 MB in SG200-08 and SG200-08P)
Packet buffer 2 @ 8 Mb
Supported Small Form-Factor Pluggable (SFP) Modules MFEFX1 Multimode fiber 100 Mbps 2 km, MFELX1 Single-mode fiber 100 Mbps 10 km, MFEBX1 Single-mode fiber 100 Mbps 20 km, MGBBX1 Single-mode fiber 1000 Mbps 40 km, MGBSX1 Multimode fiber 1000 Mbps 300 m, MGBLH1 Single-mode fiber 1000 Mbps 40 km, MGBLX1 Single-mode fiber 1000 Mbps 10 km
Dimensions (W x H x D) 440 x 44 x 257mm
Unit weight 3.96kg
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Package Contents

Cisco 200 Series Smart Switch
Power cord (power adapter for 8-port SKUs)
Mounting hardware
CD-ROM with user documentation (PDF) included
Quick-start guide

Cisco

We are a Cisco Select Partner. Contact us if you need help with your Cisco solution.

Featured Video:

Questions & Answers

Have a technical question about this product?

Ask us a question

Customer Product Reviews

Purchased this item? Be the first to write a review

Write your own review

Additional Details:

  • Stock Availability: Out of Stock!
  • Warranty: Lifetime
  • Manufacturer: Cisco Shop
  • Product Found In: Managed Switches
  • Model Number: SLM2048T-AU
  • Part Number: DD00192