Dynalink RTA1046VW ADSL2+ 4 Port Wireless Router with 2x VOIP Model Number: RTA1046VW

Dynalink RTA1046VW ADSL2+ 4 Port Wireless Router with 2x VOIP

Overview

The RTA1046VW is an ADSL2+ IAD (all in one Integrated Access Device) that incoporates an ADSL2+ modem, 4-port network switch, 54Mbps wireless access point and two phone ports for VoIP in one box.

It is simialr to the RTA1025W with the addition of built in VoIP capabilities. The RTA1046VW provides wireless internet and file sharing between multiple computers. With it’s built in four port switch providing connections to four computers via Ethernet cable, supplying a seamless network to over 8 PC’s with no other hardware required.

Included in its long list of features is an IP packet filtering firewall, WEP, WPA and WPA2 wireless encryption. These provide a safe platform while providing the user with the capability to talk on the phone while surfing the internet at the same time all in one sleek and stylish unit.
Please note: you will have to arrange for a VoIP service with a provider in order to make Internet phone calls with this product.

All Dynalink Wireless Network products have a one year warranty.

Features

• Broadcom BCM6348 chipset solution
• Broadband Internet Access up to 24 Mbps
• Supports ADSL2+, ADSL2 and ADSL2
• Simple Configuration
• Integrated 54 Mbps Wireless Access
• Fixed undetachable antenna
• Wireless Security, WEP, WPA and WPA2
• 4 Ethernet Ports for Internet Sharing
• Suitable for Home and Office Networks
• Packet filtering firewall
• Port forwarding, QoS to prioritise traffic and UPnP
• VPN Passthrough
• 2 Phone ports and PSTN backup
• Annex M support

Specifications

ADSL Compliance
• ADSL
• ANSI T1.413 Issue 2
• ITU G.992.1 Annex A (G.dmt)
• ITU G.992.2 Annex A (G.lite)
• ITU G.994.1 (G.hs)
• Support dying gasp
• Maximum Rate: 8 Mbps downstream and
• 1 Mbps upstream
• ADSL2
• ITU G.992.3 Annex A (G.dmt)
• ITU G.992.4 Annex A (G.lite)
• Maximum Rate: 12 Mbps downstream and
• 1 Mbps upstream
• ADSL2+
• ITU G.992.5 Annex A (G.dmt)
• Maximum Rate: 24 Mbps downstream and
• 1.2 Mbps upstream

ATM
• PPPoA (RFC 2364) and PPPoA Bridged mode
• PPPoE (RFC 2516) and PPPoE Bridged mode
• IPoA (RFC 2225)
• Bridged mode over AAL5 (RFC2684/1483)
• ATM Forum UNI 3.1 / 4.0 compliant PVCs
• UBR and CBR with trac shaping
• OAM F4/F5 loopback cells

Bridging
• IEEE 802.1d self-learning bridge
• Learning up to 4096 MAC addresses
• Supports IGMP Snooping
• Supports 802.1Q VLAN packet pass-through

Voice over IP Features
• Call Feature: basic outgoing and incoming call, Call Waiting, Three Party Conference, Call
• Transfer, Caller ID (only when supported by service provider).
• Call Control: SIP (RFC3261)
• Voice Transport: compliance to RTP (RFC1889)
• Voice Codec: G.711 (a-law and u-law), G.726 and G.729
• Tone/Ring Signal: compliance to Australia & New Zealand standards.
• Tone Detection: support DTMF
• Echo Cancellation: G.168 compliance
• Support FAX/Analog Modem function via PSTN port
• Support RFC2833 RTP Payload for DTMF Digits,
• Telephony Tones and Telephony Signals
• Two VoIP (FXS) ports for VoIP phone calls supporting intelligent lifeline backup when there is no Internet service.
• Manual selection of PSTN mode or VoIP mode for making phone calls
• Automatic selection of PSTN when an emergency number is dialled.

Routing
• NAT / PAT allows multiple users to share Internet access
• UPnP IGD with NAT traversal capability
• Port Forwarding: users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on the local network.
• Static routing & dynamic routing RIPv1/v2
• DNS Relay, Dynamic DNS
• DHCP Client/Relay/Server
• IGMP Proxy
• Support IP/Bridge QoS for dierent trac classes
• Support 802.1Q VLAN Tagging

Configuration and Management
• Embedded web conguration interface with password protection
• Remote management control
• Telnet session for local or remote management
• System events logging
• DSL connection diagnostics
• Firmware upgrade via web browser
• User setting backup & restore
• SNMPv1/v2 agent with MIB-II, ADSL Line MIB

Supported Applications
• Application Level Gateways preset for Auth/Ident, DNS, FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET, TFTP & WEB servers. Multiple Virtual Servers can be setup in local network.
• VPN passthrough
• NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player, CuSeeMe, online gaming.

Security
• PAP, CHAP, and MS-CHAP/CHAP2 for PPP authentication
• Firewall based on incoming & outgoing filtering of IP address/Port number/Protocol type
• Ping blocking from WAN
• DMZ hosting

Hardware Interface
• One RJ-11 port for ADSL connection
• One RJ-11 port (FXO port) for connecting to PSTN line
• Two RJ-11 ports (FXS ports) for VOIP phone calls
• Four Ethernet ports for IEEE 802.3/802.3u 10/100
• Base-T auto-sensing and auto-crossover
• One hidden button for restoring factory default settings

Chipset
• Broadcom BCM6348 single-chip ADSL2+ with integrated MIPS32 CPU, transceiver & Analog
• Front End Broadcom BCM4318 single-chip 802.11g wireless LAN solution

Power Requirement and Operation Environment Requirement
• Power Adaptor: Output 12 VAC, 1.5A
• Power Consumption: less than 15 W
• Ambient Temperature: 0 to 40°C
• Relative Humidity: 20% to 90% (non-condensing)

Wireless LAN
• Supports IEEE 802.11g and 802.11b
• Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g and 11, 5.5, 2, 1 Mbps for 802.11b
• Diversity antenna system: one external antenna and one internal antenna
• Maximum RF output power: 13.5dBm for 802.11g
• Coverage Area: 802.11g: LOS (Outdoors): Max. 50 meters;
• Indoors: Max. 20 meters 802.11b: LOS (Outdoors): Max. 180 meters; Indoors: Max. 60 meters
• Support WEP (Wired Equivalent Privacy) RC4 with 64-bit or 128-bit key length
• Support Access Control List, only registered WLAN clients are allowed
• Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed
• WAP/WPA2.

Regulatory Approval and Compliance
• ACA
• Telecom New Zealand PTC270

While every attempt is made to ensure the information provided is accurate, we are not responsible for any product image and information errors and omissions.