Skip to main content
One of NZ’s biggest online shops for computer & office supplies
Show Category menu
Low Stock. Hurry, Almost Sold Out

Cisco WAP131 Wireless-N Dual Band PoE Access Point

Save $156 off RRP
Model: WAP131-A-K9-AU Ask a question about this item

Genuine NZ new item

Find out more...

Today's Price

$236.90incl gst

Free Delivery

Low Stock. Hurry, Almost Sold Out

Delivery Timeframe

  • Auckland
    1 Day
  • North island
    1-2 Days
  • South island
    1-3 Days

Product Description:

Cisco WAP131 Wireless-N Dual Band PoE Access Point

In todays dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need dependable, business-class access to network applications throughout the office. The Cisco WAP131 Wireless-N Dual Radio Access Point provides a simple, cost-effective way to extend secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.


Concurrent dual-band radio support for up to 300 Mbps per radio to maximize capacity and coverage.
Single Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network.
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection, helps protect sensitive business information.
Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment and setup in minutes.
Desktop design with integrated stand, for easy access and placement.
Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
Power-saving sleep mode and port control features help maximize energy efficiency.
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.


Network Capabilities
Wireless throughput: Up to 300-Mbps data rate (real-world throughput will vary)
Recommended user support: Up to 32 connective users, 16 active users per radio
VLAN support: Yes
Number of VLANs: 1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant: Yes
SSID-to-VLAN mapping: Yes
Auto channel selection: Yes
Spanning tree: Yes
Load balancing: Yes
IPv6: Yes - IPv6 host support, IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2: 802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
Quality of Service (QoS): Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Frequency: Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type: Dual radio, orthogonal frequency division multiplexing (OFDM)
WLAN: 802.11n, 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams, 20, and 40 MHz for 802.11n, PHY data rate up to 600 Mbps
Wireless isolation: Wireless isolation between clients
External antennas: None
Internal antennas: Internal Fixed PiFA Antenna
Antenna gain in dBi: Maximum antenna gain of 3.4 dBi on 2.4 GHz, Maximum antenna gain of 4.5 dBi on 5 GHz
Wireless distribution system (WDS): Yes
802.11i: Yes
Multiple SSIDs: 8
Wireless VLAN map: Yes
WLAN security: Yes
Wi-Fi Multimedia (WMM): Yes, with unscheduled automatic power save

Physical Interfaces
Ports: 10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter
Power Supply: External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
Buttons: Reset button, Power (on/off), Push button
Lock slot: Slot for Kensington lock
LEDs: Power, Wireless, Ethernet

Management protocols: Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management: Yes
Event logging: Local, remote syslog, email alerts
Network diagnostics: Logging and packet capture
Web firmware upgrade: Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP): DHCP client
IPv6 host: Yes
HTTP redirect: No

Standards: IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type: Cat5e or better
Antennas: Internal antennas optimized for desktop installation with vertical orientation
LED indicators: Power, WLAN, LAN
Operating system: Linux
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Operating temperature: 0 to 40C (32 to 104F)
Storage temperature: -20 to 70C (-4 to 158F)
Operating humidity: 10% to 85% noncondensing
Storage humidity: 5% to 90% noncondensing
System memory: 128-MB RAM, 128-MB Flash
Physical dimensions (W x D x H): 170 x 170 x 35.9 mm
Weight: 0.40kg


UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1

Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)

Package Contents:

Cisco WAP131 Wireless-N Dual Radio Access Point
AC Power Adapter
User guide on CD-ROM
Quick-start guide
Ethernet network cable


We are a Cisco Select Partner. Contact us if you need help with your Cisco solution.

Questions & Answers

Have a technical question about this product?

Ask us a question

Customer Product Reviews

Purchased this item? Be the first to write a review

Write your own review

Additional Details:

  • Stock Availability: 2 In Stock Now!
  • Warranty: Lifetime
  • Manufacturer: Cisco Shop
  • Product Found In: Access Points
  • Model Number: WAP131-A-K9-AU
  • Part Number: DD00301